Description anycubic abs-like resin pro 2 clear
Anycubic ABS-Like Resin Pro 2 Clear — Transparent, Strong and Highly Precise UV Resin
Anycubic ABS-Like Resin Pro 2 Clear is a high-performance transparent photopolymer designed to deliver enhanced toughness, clarity, and detail. With superior elongation, impact resistance, and optical transparency, it is ideal for technical models, see-through prototypes, and mechanical components requiring accuracy and strength.
Key Advantages
- Crystal Clear Transparency: Provides excellent visual clarity for display models, fluid simulations, and illuminated parts.
- Superior Mechanical Strength: Withstands impact and bending without cracking — perfect for working components.
- Dimensional Accuracy: Low shrinkage ensures sharp details and minimal deformation.
- Improved Flow and Fast Curing: Enables faster layer formation and smoother surfaces.
- Low-Odor Formula: Optimized for safer, more comfortable indoor printing environments.
- Wide Printer Compatibility: Suitable for most LCD and DLP printers with 365–405nm wavelength.
Technical Specifications
| Parameter | Value |
|---|---|
| UV Wavelength | 365–405 nm |
| Elongation at Break | 30–40% |
| Density | 1.1–1.2 g/cm³ |
| Molding Shrinkage | 4.3–5.6% |
| Viscosity | 300–400 cP·mPa·s |
| Flexural Strength | 40–50 MPa |
| Flexural Modulus | 1000–1200 MPa |
| Hardness | 82–84D |
| Heat Deflection Temperature | 60–65°C |
| Tensile Strength | 35–45 MPa |
| Cleaning Method | Alcohol |
| Shelf Life | 1.5 years |
Instructions for Use
- Before printing: Shake thoroughly. Ensure vat and platform are clean and dust-free.
- During printing: Pour resin and apply recommended exposure parameters for your printer.
- After printing: Remove the model using gloves. Rinse in alcohol or use ultrasonic cleaning.
- Post-processing: Dry completely, remove supports, and cure under UV light or in a Wash & Cure machine.
Precautions
- Store in a cool (18–35°C), dry, dark place, tightly sealed.
- Do not heat above 60°C. Warm slightly if thickened due to cold.
- Shake before use if pigment settles.
- Do not soak prints in alcohol or water for extended periods.
- Always perform full UV post-curing for maximum strength and durability.
- Recommended curing:
- UV LED/mercury lamp: 5–10 mW/cm², up to 1 hour
- Direct sunlight (summer): ~1 hour
Frequently Asked Questions (FAQ)
- Is this resin truly transparent?
- Yes, it cures to a highly transparent finish, suitable for clear visual models and internal component visualization.
- Can I print functional parts with it?
- Yes. It is formulated for durability, flexibility, and load-bearing capabilities.
- What printers are compatible?
- Any LCD or DLP printer using 365–405nm UV light — including all Anycubic Photon series models.
- Is it safe to use indoors?
- Yes. It is low-odor and designed for safe use in well-ventilated spaces.