Description anycubic high speed resin 2.0 white
Anycubic High Speed Resin 2.0
Accelerate Your Creativity with Anycubic High Speed Resin 2.0
Product Overview
The Anycubic High Speed Resin 2.0 is designed to provide rapid curing, faster printing, and durable results. This resin has significantly reduced viscosity compared to regular resins, allowing for quicker and more efficient printing without sacrificing quality.
Key Features and Benefits
- Fast Printing: Reduces layer curing time by 21.56% for quicker print completion.
- Low Viscosity: Reduced by 50%, aiding in heat dissipation during printing, which prevents overheating and ensures smooth results.
- Enhanced Durability: Resilience improved from 7.5% to 20%, reducing the likelihood of failures and damages during printing.
- Detailed Prints: Great for fine details, textures, and smooth finishes due to low shrinkage during curing.
- Less Odor: Compared to other fast resins, the High Speed Resin 2.0 has a significantly reduced odor, providing a healthier printing experience.
Resin Specifications
| Property | Specification |
|---|---|
| Wavelength | 365-405nm |
| Elongation at Break | 16-20% |
| Density | 1.14g/cm³ |
| Viscosity | 75-85 cPimPa·s |
| Flexural Strength | 52-65 MPa |
| Flexural Modulus | 1700-3300 MPa |
| Surface Hardness | 83-85D |
| Tensile Strength | 37-47 MPa |
| Bottom Exposure Time | 15-25s |
| Normal Exposure | 1.5-2.8s |
| Recommended Printing Temperature | ≥20°C |
| Shelf Life | 1.5 Years |
| Resin Wash | Wash for more than 3 minutes with 95° isopropyl alcohol |
| Curing Method | 3 minutes under UV light |
Recommended Printing Parameters for Anycubic High Speed Resin 2.0
Below are the recommended printing parameters for different 3D printers using Anycubic High Speed Resin 2.0. These settings are designed to optimize print quality and efficiency.
Recommended Settings
| Printer Model | Layer Thickness | Exposure Time | Off Time | Bottom Exposure Time | Bottom Layers | Anti-alias | Z Lift Distance | Z Lift Speed | Z Retract Speed |
|---|---|---|---|---|---|---|---|---|---|
| Photon Mono M7 Max | 0.1mm | 1.8s | 0.5s | 30s | 5 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono M7 | 0.1mm | 1.4s | 0.5s | 15s | 3 | 1 | 4mm | 15mm/s | 15mm/s |
| Photon Mono 4 | 0.1mm | 2.2s | 1s | 30s | 5 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon Mono 4 Ultra | 0.1mm | 2s | 1s | 30s | 5 | 1 | 5mm | 8mm/s | 8mm/s |
| Photon Mono M7 Pro | 0.1mm | 1.4s | 0.5s | 15s | 3 | 1 | 4mm | 15mm/s | 15mm/s |
| Photon Mono M5s Pro | 0.1mm | 1.9s | 0.5s | 15s | 5 | 1 | 3mm | 20mm/s | 20mm/s |
| Photon Mono M5s | 0.1mm | 1.9s | 0.5s | 15s | 5 | 1 | 3mm | 20mm/s | 20mm/s |
| Photon Mono M5 | 0.1mm | 2s | 0.5s | 15s | 5 | 1 | 5mm | 6mm/s | 6mm/s |
| Photon Mono X 6Ks | 0.1mm | 2.5s | 0.5s | 15s | 5 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon Mono 2 | 0.1mm | 2.5s | 0.5s | 18s | 5 | 1 | 5mm | 4mm/s | 6mm/s |
| Photon Mono M3 Max | 0.1mm | 2.8s | 0.5s | 25s | 6 | 1 | 8mm | 4mm/s | 4mm/s |
| Photon Mono X2 | 0.1mm | 2.5s | 0.5s | 18s | 5 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon M3 Premium | 0.1mm | 2.5s | 0.5s | 25s | 5 | 1 | 6mm | 6mm/s | 6mm/s |
| Photon X 6K | 0.1mm | 2s | 0.5s | 18s | 6 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon Mono 4K | 0.1mm | 2s | 0.5s | 25s | 6 | 1 | 5mm | 4mm/s | 6mm/s |
| Photon D2 | 0.1mm | 2.5s | 0.5s | 18s | 5 | 1 | 5mm | 2mm/s | 3mm/s |
| Photon M3 Premium | 0.1mm | 2.5s | 0.5s | 25s | 5 | 1 | 6mm | 6mm/s | 6mm/s |
| Photon M3 | 0.1mm | 2s | 0.5s | 18s | 5 | 1 | 5mm | 4mm/s | 6mm/s |
| Photon M3 Plus | 0.1mm | 1.5s | 0.5s | 18s | 6 | 1 | 6mm | 6mm/s | 6mm/s |
Instructions for Use
- Before use: Shake the resin bottle before use. Clean the resin tank and the molding platform to ensure proper light transmission.
- During use: Add resin to the resin tank according to the equipment requirements. Select the appropriate print parameters and settings.
- After use: Use tools such as a blade, pliers, and tweezers for post-processing. Clean the printed models with ethanol or isopropyl alcohol (≥95%).
- Post-processing steps:
- Remove the printed model from the molding platform using a blade.
- Submerge the model in cleaning solution and rinse or wash ultrasonically, then drain it.
- Use Anycubic Wash and Cure machines for better results.
- Perform proper post-processing, such as removing supports, polishing, or coloring.
Wastewater Disposal
- Do not discharge wastewater directly into the sewer to avoid contaminating groundwater.
- Heat the wastewater to evaporate most of the water and discard the residue after curing using a curing machine or sunlight.
Precautions
- Storage: Store uncured resin in a cool, dark place at room temperature, and protect it from light.
- Operating Temperature: Suggested operating temperature is 18-35°C. Preheat the resin if necessary (up to 60°C).
- Ensure the model is removed from the cleaning solution promptly to avoid excessive soaking.
- Post-cure the model as soon as possible after cleaning and drying for optimal mechanical properties.
- Control light exposure during curing to prevent over-curing.
- Light Source Intensity: Use a mercury or LED light source with an intensity of 5-10mW/m² and limit exposure to 1 hour.
- Do not expose the resin to strong light sources for prolonged periods.
For safety information, please refer to the MSDS (Material Safety Data Sheet) for this product.
Anycubic High Speed Resin 2.0 White is a next-generation UV photopolymer designed for ultra-fast 3D printing. Its clean white tone ensures sharp visibility and easy post-processing. With low exposure time, excellent surface finish, and minimal shrinkage, it's ideal for miniatures, concept models, and production parts. Optimised for Anycubic high-speed LCD printers.