Anycubic Standard Resin V2 is an advanced photopolymer resin for LCD 3D printers, designed to provide high precision, durability and stability of printing. It is suitable for both beginners and experienced users, offering the optimal balance between quality and ease of use. The resin provides smooth surfaces, clear details and minimal shrinkage, making it ideal for creating prototypes, figurines, decorative models and functional parts. Thanks to the improved formula, it has higher strength and wear resistance compared to the previous version, as well as low odor for comfortable printing. The resin is compatible with most LCD printers with a wavelength of 365-405 nm and provides fast molding due to good flowability.
Main features:
- High precision : Smooth surfaces and sharp details with minimal shrinkage.
- Improved strength : Higher wear resistance and resistance to deformation.
- Low odor : Reduced VOC content for comfortable printing.
- Good fluidity : Ensures fast forming and printing stability.
- Versatility : Suitable for prototypes, figurines, decorative models and functional parts.
- Compatibility : Optimized for LCD printers with wavelengths of 365–405 nm.
- Colors: White, gray, black, transparent, red, blue, green, orange, yellow, aqua blue, light beige and others.
Technical characteristics and parameters of the resin:
- Curing wavelength (UV wavelength): 365–405 nm.
- Elongation at break: 25–30%.
- Density: 1.05–1.25 g/cm³.
- Molding shrinkage: 4.3–5.6%.
- Viscosity: 250–350 cP·mPa·s.
- Flexural strength: 40–50 MPa.
- Hardness: 80–83 Shore D.
- Flexural modulus: 1500–2100 MPa.
- Base layer exposure time (Bottom exposure time): 20–40 s.
- Normal exposure time: 1.5–3 s.
- Heat deflection temperature (Heat deflection temp): 60–65°C.
- Cleaning (Resin wash): Alcohol (isopropyl alcohol ≥95%, ethanol or lactate).
- Tensile strength: 35–45 MPa.
- Shelf life (Conservation period): 1.5 years.
Additional technical specifications:
- Cleaning:
- Isopropyl alcohol (≥95%), ethanol or lactate.
- Methods: hand washing, ultrasound or Anycubic Wash & Cure machine.
- Post-processing:
- Curing under UV light: Intensity 5–10 mW/m², duration up to 1 hour.
- In the sun (summer): ~1 hour.
- Avoid prolonged exposure to strong UV sources.
- The Anycubic Wash & Cure machine is recommended.
- Storage: In a cool, dry, dark place at 18–35°C, protected from light and high temperatures. Shake before use, at low temperatures warm to 30°C.
- Packaging: 1 kg bottles (e.g. 3 kg = three 1 kg bottles).
Recommendations for use:
- Before use: Shake the resin, clean the tank and platform to ensure light transmission.
- When printing: Print in a dark room or with a cover. Use settings: 1.5–3 s for normal layers, 20–40 s for base layers.
- After printing:
Use tools (blade, forceps, tweezers, gloves).
Rinse with alcohol (≥95% ethanol, isopropyl alcohol, or lactate).
Dry and harden the model.
Settings: For exact settings, please contact Anycubic support.
Warning:
- The resin is cleaned with alcohol (not water).
- Avoid prolonged soaking in water after cleaning.
- In case of leakage, contact support.
- Print in a ventilated area, use gloves and masks.