Description anycubic wash & cure 3 plus — post-processing station for large resin 3d prints
Anycubic Wash & Cure 3 Plus — Post-Processing Station for Large Resin 3D Prints
Anycubic Wash & Cure 3 Plus is a powerful 3-in-1 post-processing solution that combines washing, UV curing, and localized FlexiCure for detailed parts. Featuring a larger cleaning volume, dual-layer curing table, flexible gooseneck UV light, and intuitive controls, it is ideal for handling large-format models up to 10.6 inches.
Key Advantages
- Increased Washing Volume: 7.6 liters in the basket and up to 12 liters total — 13.4% larger than the previous generation.
- Dual-Layer Design: The two-tier platform increases curing capacity per cycle, improving productivity.
- IPA Saving: Adjustable washing basket (150mm or 250mm height) supports build platforms from 7.6" to 10.6", ensuring optimal alcohol efficiency.
- Flexicure Gooseneck Light: Delivers 30,000 μW/cm² UV energy within 1–3 cm, enhancing detail curing (e.g., figure tops, folds).
- Uniform UV Curing: Lens-array LED beads improve curing uniformity by 20% over previous versions.
- Quiet Operation: Enclosed design and firmware optimization minimize working noise.
- User-Friendly Interface: Multi-touch buttons and rotary timer (1 to 30 minutes) offer intuitive control.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | Anycubic Wash & Cure 3 Plus |
| Function Modes | 1. Wash 2. Cure 3. FlexiCure |
| Max Cleaning Size (with platform) | 228 × 128 × 250 mm |
| Max Cleaning Size (without platform) | 228 × 128 × 260 mm |
| Max Curing Size | Ø220 × 260 mm |
| UV Light Source | 14 LEDs (405nm) + Flexicure Gooseneck |
| Gooseneck UV Intensity | 30,000 μW/cm² (at 1–3 cm) |
| Machine Dimensions | 312 × 267 × 434 mm / 12.3 × 10.5 × 17.1 inches (LWH) |
| Machine Weight | 5.7 kg / 12.5 lbs |
| Package Size | 550 × 350 × 400 mm / 21.7 × 13.8 × 15.7 inches (LWH) |
| Shipping Weight | 7.1 kg |
In the Box
- Anycubic Wash & Cure 3 Plus
- Translucent PP Washing Bucket
- Dual-Layer PP Cleaning Basket
- Rack Bar
- Transparent Dual-Layer Curing Table
- Flexicure Gooseneck UV Light
- Power Adapter
- Hex Key Set
- User Manual
FAQ — Frequently Asked Questions
- Is it compatible with large 3D models?
- Yes, it supports build plates up to 10.6" and curing areas up to Ø220×260 mm, suitable for Mono M7 Max and similar printers.
- Can I use water instead of IPA?
- Only with water-washable resins like Anycubic Water-Wash Resin+; otherwise, use isopropyl alcohol (IPA).
- Can I wash with the build plate attached?
- Yes, the basket height is adjustable for direct platform cleaning.
- What is the purpose of the Flexicure Gooseneck Light?
- It provides targeted UV exposure for fine details, hard-to-reach spots, and overhangs on complex models.