Description anycubic wash & cure 3.0 — post-processing station
Anycubic Wash & Cure 3.0 — Post-Processing Station with Gooseneck Light
Anycubic Wash & Cure 3.0 is a modern 2-in-1 device designed for washing and UV-curing resin-printed models. With increased capacity, a new light source design, and enhanced usability, it delivers faster, more uniform post-processing with optimized IPA use.
Key Advantages
- Enlarged curing area: Up to 160×180 mm — 15% larger than the previous version.
- Dual-mode operation: Easily switch between washing and curing modes with one button.
- Gooseneck Light: Flexible UV source for curing hard-to-reach parts of the model.
- Improved uniformity: New lens-array light system enhances curing evenness by 20%.
- Dual-layer basket: Wash with or without the build platform, with adjustable height.
- IPA saving: Compact tank design allows effective cleaning with just 2–3L of IPA.
- Intuitive control: Infinite rotary knob for timer adjustment (1–30 min).
Technical Specifications
| Parameter | Value |
|---|---|
| Model | Anycubic Wash & Cure 3.0 |
| Curing Area | 160 × 180 mm |
| Washing Area (no platform) | 165 × 100 × 180 mm |
| Washing Area (with platform) | 165 × 100 × 165 mm |
| UV Light Source | 10 LEDs (405nm) + Gooseneck light |
| Focused Irradiation | 30,000 μW/cm² (within 1–3 cm) |
| Timer | 1–30 minutes (rotary knob) |
| Machine Dimensions | 216 × 217 × 310 mm |
| Weight | 2.7 kg / 5.9 lbs |
| Compatibility | All LCD/DLP/SLA printers with models up to 160×180 mm |
| Power Input | 100–240V, 50/60Hz |
What's in the Box
- Anycubic Wash & Cure 3.0
- Washing bucket
- Dual-layer washing basket
- Hex key set
- Rack bar
- Curing platform
- Power adapter
- Gooseneck UV light
- User manual
FAQ — Frequently Asked Questions
- Can I use water instead of IPA?
- Only if you’re using water-washable resin such as Anycubic Water-Wash Resin+.
- Why do I need the Gooseneck Light?
- It helps cure complex areas like top surfaces, cavities, or tiny model details.
- How much IPA is required?
- Usually, 2–3 liters is sufficient due to the efficient tank size.
- Can I wash models with the build plate attached?
- Yes, the basket is height-adjustable and supports platform-mounted models.