Description gray dlp craftsman resin 1kg
Anycubic DLP Craftsman Resin Gray — Ultra-Precise Gray Resin for DLP 3D Printing
Product Description
Anycubic DLP Craftsman Resin Gray is an ultra-precise resin enhanced with NanoCeramic particles, specially formulated for DLP 3D printers. The matte gray finish enhances detail visibility, making it ideal for technical models, prototypes, and engineering parts. This resin offers low shrinkage, smooth surfaces, and a long shelf life of up to 18 months.
Key Advantages
- Matte gray tone for high-contrast detail
- NanoCeramic formula for smooth surfaces
- Low shrinkage, high flexural strength
- Compatible with 365–405 nm DLP printers
- Long shelf life: 18 months
Technical Specifications
| Parameter | Value |
|---|---|
| UV wavelength | 365–405 nm |
| Elongation at break | 20–30% |
| Density | 1.05–1.25 g/cm³ |
| Flexural strength | 50–60 MPa |
| Viscosity | 220–250 mPa·s (25°C) |
| Shrinkage | 3.72–4.24% |
| Flexural modulus | 1400–1600 MPa |
| Hardness | 84 Shore |
| Tensile strength | 35–55 MPa |
| Shelf life | 18 months |
Instructions for Use
- Shake well before use
- Clean the tank and platform
- Set exposure parameters and pour resin
- Clean prints with IPA or ethanol
- Post-cure under UV for up to 1 hour
Precautions
- Store at 18–35°C in a dark, ventilated place
- Use gloves and avoid direct contact
FAQ
- Why gray color? — Best for revealing fine surface details
- Compatible printers? — All DLP with 365–405 nm UV
- Can it be cleaned with water? — No, use IPA or ethanol