Description pla silk gold copper 1kg | 1.75mm dual-color silk pla filament
PLA Silk Gold Copper 1kg | 1.75mm Dual-Color Silk PLA Filament
PLA Silk Gold Copper is a premium dual-color silk PLA filament that blends rich gold and copper tones with a luxurious glossy silk effect. This unique filament creates smooth prints with metallic-like reflections and seamless color transitions. Perfect for decorative models, souvenirs, artistic prints, premium gifts, and design projects. It ensures strong layer adhesion, accurate geometry, and a shiny finish straight out of the printer without post-processing.
Key Advantages
- Dual-color combination of gold and copper with a silk-like glossy shine
- Beautiful metallic effect and elegant appearance
- Compatible with all FDM/FFF 3D printers using 1.75 mm filament
- Easy printing with minimal warping and shrinkage
- Eco-friendly, odorless, and safe for indoor use
Technical Specifications & Printing Conditions
| Filament Diameter | 1.75 mm |
| Printing Temperature | 190–220 °C |
| Bed Temperature | 50–60 °C |
| Enclosure | Not required |
| Printing Speed | 40–100 mm/s |
| Adhesion Surface | PEI, glue stick, painter’s tape |
| Recommended Humidity | <20% RH |
| Drying Mode | 4 hours at 45–55 °C |
Physical & Mechanical Properties
| Density | 1.24 g/cm³ |
| Tensile Strength | 60 MPa |
| Elastic Modulus | 3600 MPa |
| Elongation at Break | 6% |
| Shore Hardness | 83D |
| Heat Distortion Temperature | 55–60 °C |
Filament Geometry
| Diameter | 1.75 mm ± 0.02 mm |
| Ovality | ≤ 0.02 mm |
| Length per 1kg Spool | ~330 m |
| Net Weight | 1 kg |
Printer Compatibility
PLA Silk Gold Copper is compatible with all FDM/FFF 3D printers that support 1.75 mm filament, including:
- Anycubic: Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 2, Kobra 2 Max, Kobra Plus, Kobra Go
- Creality: Ender-3 V2, Ender-3 S1, Ender-5, CR-10, CR-6 SE
- Prusa: i3 MK3S+, MK4, Prusa Mini
- Bambu Lab: X1 Carbon, P1S, A1
- Elegoo: Neptune 3, Neptune 4
- Tronxy: X5SA, X3SA
FAQ — Frequently Asked Questions
- Can PLA Silk Gold Copper be printed without a heated bed?
- Yes, but for better adhesion we recommend a heated bed at 50–60 °C.
- Does this filament need drying before printing?
- It is recommended to dry for 3–4 hours at 45–55 °C for consistent results and improved quality.
- Which printers support PLA Silk Gold Copper?
- It is compatible with all FDM 3D printers that work with 1.75 mm filament.
- What is the best application for PLA Silk Gold Copper?
- This filament is best for decorative parts, premium models, souvenirs, and artistic prints.