PLA Filament Silk Green 1kg for 3D Printer
PLA Silk Green is a vibrant glossy filament for artistic and functional prints. It delivers a smooth, shiny finish and consistent results on any 1.75 mm compatible FDM printer. Suitable for figures, decorations, packaging, and custom designs.
Key Advantages
- Silky gloss with deep green color
- Smooth surface without polishing
- Easy printing and high adhesion
- Odorless and environmentally friendly
Technical Specifications and Print Settings
| Material |
PLA Silk |
| Color |
Green |
| Diameter |
1.75 mm |
| Weight |
1 kg |
| Nozzle Temperature |
200–220 °C |
| Bed Temperature |
50–60 °C |
| Print Speed |
40–60 mm/s |
| Drying Time |
4 hours at 50 °C |
Mechanical Properties
| Tensile Strength |
58 MPa |
| Modulus |
3600 MPa |
| Elongation at Break |
5 % |
| Heat Deflection |
60 °C |
| Density |
1.24 g/cm³ |
Filament Geometry
| Diameter Tolerance |
±0.02 mm |
| Ovality |
less than 0.02 mm |
| Winding |
uniform and clean |
| Length |
approx. 330 meters |
Printer Compatibility
- Anycubic: Kobra, Kobra 2, Max, Plus
- Creality: Ender series, CR-10
- Elegoo: Neptune 2–4
- Other: Prusa, Artillery, Tronxy, BIQU, Voron, Kingroon
FAQ
- Is it compatible with 1.75 mm printers?
- Yes, it fits all FDM printers using 1.75 mm filament.
- Should I dry it before use?
- We recommend drying for 4 hours at 50 °C for best results.
