Description pla silk purple gold 1kg | 1.75mm dual-color silk pla filament
PLA Silk Purple Gold 1kg | 1.75mm Dual-Color Silk PLA Filament
PLA Silk Purple Gold is a premium dual-color silk PLA filament that combines a deep purple and a luxurious gold tone. This filament creates 3D prints with a glossy silk-like finish and smooth color transitions, giving models an elegant and unique appearance. Perfect for souvenirs, decorative pieces, artistic projects, and premium gifts. It offers excellent layer adhesion, dimensional accuracy, and a polished surface straight off the printer without post-processing.
Key Advantages
- Exclusive two-tone combination of purple and gold with a silk shine
- Glossy and vibrant finish without polishing
- Compatible with all FDM/FFF 3D printers using 1.75 mm filament
- Easy to print with minimal warping and shrinkage
- Eco-friendly, odorless, and safe for home or office use
Technical Specifications & Printing Conditions
| Filament Diameter | 1.75 mm |
| Printing Temperature | 190–220 °C |
| Bed Temperature | 50–60 °C |
| Enclosure | Not required |
| Printing Speed | 40–100 mm/s |
| Build Plate Adhesion | PEI, glue stick, painter’s tape |
| Recommended Humidity | <20% RH |
| Drying Mode | 4 hours at 45–55 °C |
Physical & Mechanical Properties
| Density | 1.24 g/cm³ |
| Tensile Strength | 60 MPa |
| Elastic Modulus | 3600 MPa |
| Elongation at Break | 6% |
| Shore Hardness | 83D |
| Heat Distortion Temperature | 55–60 °C |
Filament Geometry
| Diameter | 1.75 mm ± 0.02 mm |
| Ovality | ≤ 0.02 mm |
| Length per 1kg Spool | ~330 m |
| Net Weight | 1 kg |
Printer Compatibility
PLA Silk Purple Gold is compatible with all FDM/FFF 3D printers that support 1.75 mm filament, including:
- Anycubic: Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 2, Kobra 2 Max, Kobra Plus, Kobra Go
- Creality: Ender-3 V2, Ender-3 S1, Ender-5, CR-10, CR-6 SE
- Prusa: i3 MK3S+, MK4, Prusa Mini
- Bambu Lab: X1 Carbon, P1S, A1
- Elegoo: Neptune 3, Neptune 4
- Tronxy: X5SA, X3SA
FAQ — Frequently Asked Questions
- Can PLA Silk Purple Gold be printed without a heated bed?
- Yes, but for better adhesion we recommend a heated bed at 50–60 °C.
- Does the filament need drying before printing?
- It is recommended to dry for 3–4 hours at 45–55 °C to achieve the best results.
- Which printers are compatible with PLA Silk Purple Gold?
- This filament is compatible with all FDM printers using 1.75 mm filament.
- What is PLA Silk Purple Gold best used for?
- It is perfect for decorative prints, souvenirs, premium gifts, and artistic projects.