Description pla silk red blue 1kg | 1.75mm dual-color silk pla filament
PLA Silk Red Blue 1kg | 1.75mm Dual-Color Silk PLA Filament
PLA Silk Red Blue is a high-quality dual-color silk PLA filament combining vibrant red and blue shades with a glossy silk finish. This filament is designed to deliver smooth, shiny prints straight from the printer without the need for post-processing. Ideal for decorative models, souvenirs, artistic prints, and design elements where appearance matters most.
Key Advantages
- Unique dual-color blend of red and blue with a silk-like glossy effect
- Shiny surface without additional polishing or coating
- Compatible with all FDM/FFF 3D printers using 1.75 mm filament
- Easy to print with minimal warping and shrinkage
- Eco-friendly, odorless, and safe material
Technical Specifications & Printing Conditions
| Filament Diameter | 1.75 mm |
| Printing Temperature | 190–220 °C |
| Bed Temperature | 50–60 °C |
| Enclosure | Not required |
| Printing Speed | 40–100 mm/s |
| Adhesion Surface | PEI, glue stick, painter’s tape |
| Recommended Humidity | <20% RH |
| Drying Mode | 4 hours at 45–55 °C |
Physical & Mechanical Properties
| Density | 1.24 g/cm³ |
| Tensile Strength | 60 MPa |
| Elastic Modulus | 3600 MPa |
| Elongation at Break | 6% |
| Shore Hardness | 83D |
| Heat Distortion Temperature | 55–60 °C |
Filament Geometry
| Diameter | 1.75 mm ± 0.02 mm |
| Ovality | ≤ 0.02 mm |
| Length per 1kg Spool | ~330 m |
| Net Weight | 1 kg |
Printer Compatibility
PLA Silk Red Blue is compatible with all FDM/FFF 3D printers that support 1.75 mm filament, including:
- Anycubic: Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 2, Kobra 2 Max, Kobra Plus, Kobra Go
- Creality: Ender-3 V2, Ender-3 S1, Ender-5, CR-10, CR-6 SE
- Prusa: i3 MK3S+, MK4, Prusa Mini
- Bambu Lab: X1 Carbon, P1S, A1
- Elegoo: Neptune 3, Neptune 4
- Tronxy: X5SA, X3SA
FAQ — Frequently Asked Questions
- Can PLA Silk Red Blue be printed without a heated bed?
- Yes, but for best adhesion we recommend a 50–60 °C heated bed.
- Does the filament require drying before printing?
- It is recommended to dry for 3–4 hours at 45–55 °C to avoid bubbles and improve print quality.
- Which 3D printers support this filament?
- It is compatible with all FDM printers that work with 1.75 mm filament.
- Is PLA Silk Red Blue suitable for technical parts?
- This filament is best suited for decorative models, souvenirs, and artistic designs rather than mechanical applications.