Description pla silk red gold 1kg | 1.75mm dual-color silk pla filament
PLA Silk Red Gold 1kg | 1.75mm Dual-Color Silk PLA Filament
PLA Silk Red Gold is a premium dual-color silk PLA filament that blends elegant red and gold shades with a glossy silk finish. This material provides a luxurious appearance with smooth color transitions, making it perfect for decorative models, artistic prints, souvenirs, and premium design projects. It ensures high dimensional accuracy, excellent layer adhesion, and a shiny finish directly out of the printer without post-processing.
Key Advantages
- Unique dual-color combination of red and gold with a silk-like glossy effect
- Shiny surface straight from the printer without additional finishing
- Compatible with all FDM/FFF 3D printers using 1.75 mm filament
- Easy printing with minimal warping and shrinkage
- Eco-friendly, odorless, and safe material
Technical Specifications & Printing Conditions
| Filament Diameter | 1.75 mm |
| Printing Temperature | 190–220 °C |
| Bed Temperature | 50–60 °C |
| Enclosure | Not required |
| Printing Speed | 40–100 mm/s |
| Adhesion Surface | PEI, glue stick, painter’s tape |
| Recommended Humidity | <20% RH |
| Drying Mode | 4 hours at 45–55 °C |
Physical & Mechanical Properties
| Density | 1.24 g/cm³ |
| Tensile Strength | 60 MPa |
| Elastic Modulus | 3600 MPa |
| Elongation at Break | 6% |
| Shore Hardness | 83D |
| Heat Distortion Temperature | 55–60 °C |
Filament Geometry
| Diameter | 1.75 mm ± 0.02 mm |
| Ovality | ≤ 0.02 mm |
| Length per 1kg Spool | ~330 m |
| Net Weight | 1 kg |
Printer Compatibility
PLA Silk Red Gold is compatible with all FDM/FFF 3D printers that support 1.75 mm filament, including:
- Anycubic: Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 2, Kobra 2 Max, Kobra Plus, Kobra Go
- Creality: Ender-3 V2, Ender-3 S1, Ender-5, CR-10, CR-6 SE
- Prusa: i3 MK3S+, MK4, Prusa Mini
- Bambu Lab: X1 Carbon, P1S, A1
- Elegoo: Neptune 3, Neptune 4
- Tronxy: X5SA, X3SA
FAQ — Frequently Asked Questions
- Can PLA Silk Red Gold be printed without a heated bed?
- Yes, but for optimal adhesion we recommend using a heated bed at 50–60 °C.
- Does the filament need drying before use?
- It is recommended to dry for 3–4 hours at 45–55 °C to improve print quality and prevent bubbles.
- Which printers are compatible with PLA Silk Red Gold?
- It is compatible with all FDM printers that support 1.75 mm filament.
- What is the best application for PLA Silk Red Gold?
- This filament is ideal for decorative models, premium designs, souvenirs, and artistic prints.