Description pla silk red green 1kg | 1.75mm dual-color silk pla filament
PLA Silk Red Green 1kg | 1.75mm Dual-Color Silk PLA Filament
PLA Silk Red Green is a premium dual-color silk PLA filament that combines red and green shades with a glossy silk effect. This unique material delivers a vibrant appearance with smooth color transitions, making it perfect for decorative models, artistic prints, and presentation prototypes. The filament offers excellent dimensional accuracy, smooth extrusion, and strong layer adhesion, ensuring high-quality results on any FDM 3D printer.
Key Advantages
- Dual-color blend of red and green with a glossy silk finish
- Shiny surface straight from the printer without post-processing
- Compatible with all FDM/FFF 3D printers using 1.75 mm filament
- Easy printing with low warping and shrinkage
- Eco-friendly and odorless material
Technical Specifications & Printing Conditions
| Filament Diameter | 1.75 mm |
| Printing Temperature | 190–220 °C |
| Bed Temperature | 50–60 °C |
| Enclosure Temperature | Not required |
| Printing Speed | 40–100 mm/s |
| Adhesion Surface | PEI, glue stick, painter’s tape |
| Recommended Humidity | <20% RH |
| Drying Mode | 4 hours at 45–55 °C |
Physical & Mechanical Properties
| Density | 1.24 g/cm³ |
| Tensile Strength | 60 MPa |
| Elastic Modulus | 3600 MPa |
| Elongation at Break | 6% |
| Shore Hardness | 83D |
| Heat Distortion Temperature | 55–60 °C |
Filament Geometry
| Diameter | 1.75 mm ± 0.02 mm |
| Ovality | ≤ 0.02 mm |
| Filament Length (per 1kg) | ~330 m |
| Net Weight | 1 kg |
Printer Compatibility
PLA Silk Red Green is compatible with all FDM/FFF 3D printers using 1.75 mm filament, including:
- Anycubic: Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 2, Kobra 2 Max, Kobra Plus, Kobra Go
- Creality: Ender-3 V2, Ender-3 S1, Ender-5, CR-10, CR-6 SE
- Prusa: i3 MK3S+, MK4, Prusa Mini
- Bambu Lab: X1 Carbon, P1S, A1
- Elegoo: Neptune 3, Neptune 4
- Tronxy: X5SA, X3SA
FAQ — Frequently Asked Questions
- Can PLA Silk Red Green be printed without a heated bed?
- Yes, but we recommend using a 50–60 °C heated bed for better adhesion.
- Does the filament need drying before use?
- It is recommended to dry for 3–4 hours at 45–55 °C to avoid bubbles and improve print quality.
- Which 3D printers support this filament?
- It is compatible with all FDM printers that support 1.75 mm filament.
- Is this filament suitable for mechanical parts?
- PLA Silk Red Green is best suited for decorative items, models, souvenirs, and artistic prints.