Description pla silk rose red black 1kg | 1.75mm dual-color silk pla filament
PLA Silk Rose Red Black 1kg | 1.75mm Dual-Color Silk PLA Filament
PLA Silk Rose Red Black is a premium dual-color silk PLA filament that combines a vivid rose red with deep black. The striking contrast of colors and glossy silk-like finish make printed models stand out with elegance and boldness straight off the printer, without the need for post-processing. It is perfect for decorative figures, souvenirs, premium gifts, and designer projects. Compatible with all FDM/FFF 3D printers that use 1.75 mm filament.
Key Advantages
- Unique dual-color blend of rose red and black
- Silk-like glossy surface without polishing
- Excellent dimensional accuracy and stability
- Easy to print with minimal shrinkage and warping
- Eco-friendly, odorless, and safe for indoor use
Technical Specifications & Printing Conditions
| Filament Diameter | 1.75 mm |
| Printing Temperature | 190–220 °C |
| Bed Temperature | 50–60 °C |
| Enclosure | Not required |
| Printing Speed | 40–100 mm/s |
| Build Plate Adhesion | PEI, glue stick, painter’s tape |
| Recommended Humidity | <20% RH |
| Drying Mode | 4 hours at 45–55 °C |
Physical & Mechanical Properties
| Density | 1.24 g/cm³ |
| Tensile Strength | 60 MPa |
| Elastic Modulus | 3600 MPa |
| Elongation at Break | 6% |
| Shore Hardness | 83D |
| Heat Distortion Temperature | 55–60 °C |
Filament Geometry
| Diameter | 1.75 mm ± 0.02 mm |
| Ovality | ≤ 0.02 mm |
| Length per 1kg Spool | ~330 m |
| Net Weight | 1 kg |
Printer Compatibility
PLA Silk Rose Red Black is compatible with all FDM/FFF 3D printers that support 1.75 mm filament, including:
- Anycubic: Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 2, Kobra 2 Max, Kobra Plus, Kobra Go
- Creality: Ender-3 V2, Ender-3 S1, Ender-5, CR-10, CR-6 SE
- Prusa: i3 MK3S+, MK4, Prusa Mini
- Bambu Lab: X1 Carbon, P1S, A1
- Elegoo: Neptune 3, Neptune 4
- Tronxy: X5SA, X3SA
FAQ — Frequently Asked Questions
- Can PLA Silk Rose Red Black be printed without a heated bed?
- Yes, but for better adhesion we recommend heating the bed to 50–60 °C.
- Does the filament need drying before printing?
- Yes, drying for 3–4 hours at 45–55 °C ensures stable quality.
- Which printers are compatible with PLA Silk Rose Red Black?
- It is compatible with all FDM printers that support 1.75 mm filament.
- What is PLA Silk Rose Red Black best used for?
- It is ideal for decorative models, souvenirs, premium gifts, and designer projects.