Description pla silk yellow green 1kg | 1.75mm dual-color silk pla filament
PLA Silk Yellow Green 1kg | 1.75mm Dual-Color Silk PLA Filament
PLA Silk Yellow Green is a dual-color silk PLA filament that combines a bright yellow and a vivid green tone. This filament produces glossy prints with a smooth transition between colors, creating eye-catching decorative models straight off the printer without the need for post-processing. It is perfect for souvenirs, artistic projects, decorative figures, and premium gifts. Compatible with all FDM/FFF 3D printers using 1.75 mm filament.
Key Advantages
- Unique combination of bright yellow and green with a silk-like shine
- Glossy surface straight from the printer without polishing
- High dimensional accuracy and stable printing performance
- Easy to print with minimal shrinkage and warping
- Eco-friendly, odorless, and safe for indoor use
Technical Specifications & Printing Conditions
| Filament Diameter | 1.75 mm |
| Printing Temperature | 190–220 °C |
| Bed Temperature | 50–60 °C |
| Enclosure | Not required |
| Printing Speed | 40–100 mm/s |
| Build Plate Adhesion | PEI, glue stick, painter’s tape |
| Recommended Humidity | <20% RH |
| Drying Mode | 4 hours at 45–55 °C |
Physical & Mechanical Properties
| Density | 1.24 g/cm³ |
| Tensile Strength | 60 MPa |
| Elastic Modulus | 3600 MPa |
| Elongation at Break | 6% |
| Shore Hardness | 83D |
| Heat Distortion Temperature | 55–60 °C |
Filament Geometry
| Diameter | 1.75 mm ± 0.02 mm |
| Ovality | ≤ 0.02 mm |
| Length per 1kg Spool | ~330 m |
| Net Weight | 1 kg |
Printer Compatibility
PLA Silk Yellow Green is compatible with all FDM/FFF 3D printers that support 1.75 mm filament, including:
- Anycubic: Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 2, Kobra 2 Max, Kobra Plus, Kobra Go
- Creality: Ender-3 V2, Ender-3 S1, Ender-5, CR-10, CR-6 SE
- Prusa: i3 MK3S+, MK4, Prusa Mini
- Bambu Lab: X1 Carbon, P1S, A1
- Elegoo: Neptune 3, Neptune 4
- Tronxy: X5SA, X3SA
FAQ — Frequently Asked Questions
- Can PLA Silk Yellow Green be printed without a heated bed?
- Yes, but we recommend using 50–60 °C for better adhesion.
- Does the filament require drying before printing?
- It is recommended to dry for 3–4 hours at 45–55 °C to ensure consistent quality.
- Which printers are compatible with PLA Silk Yellow Green?
- It is compatible with all FDM 3D printers that use 1.75 mm filament.
- What is PLA Silk Yellow Green best used for?
- It is best suited for decorative prints, souvenirs, premium gifts, and artistic projects.