Description anycubic water-wash resin+ version 2.0 hd gray
Anycubic Water-Wash Resin+ Version 2.0 HD Gray — High Precision Water Washable Resin
Product Description
Anycubic Water-Wash Resin+ Version 2.0 HD Gray is an upgraded water-washable photopolymer resin with a dense gray tone ideal for fine detail visualization. Version 2.0 offers improved toughness, reduced cracking, and faster curing. The resin is compatible with all 365–405 nm LCD and DLP 3D printers.
Key Advantages
- Version 2.0 formula — stronger, faster, more stable
- Water washable — no alcohol needed
- HD gray color enhances detail visibility
- Low shrinkage and low odor
- Compatible with 365–405 nm UV printers
Technical Specifications
| Parameter | Value |
|---|---|
| UV wavelength | 365–405 nm |
| Elongation at break | 8–15% |
| Density | 1.15–1.20 g/cm³ |
| Tensile modulus | 1600–1800 MPa |
| Viscosity | 150–250 mPa·s (25°C) |
| Flexural strength | 30–45 MPa |
| Flexural modulus | 1500–1600 MPa |
| Hardness | 80 Shore D |
| Heat deflection temp | 60–65°C |
| Tensile strength | 50–60 MPa |
| Impact strength | 50–60 J/m |
| Shelf life | 1.5 years |
Instructions for Use
- Shake bottle well before use
- Ensure vat and build plate are clean
- Pour resin and configure settings
- Rinse model in water after printing
- Dry and UV cure for 5–15 minutes
Precautions
- Store in a cool, dark place
- Work in a ventilated area and wear gloves
- Do not soak models for long in water
- Perform post-curing for full strength
FAQ
- What’s new in Version 2.0? — Better stability, faster printing, and reduced cracking
- Is alcohol required for cleaning? — No, only clean water is needed
- Does it show fine details? — Yes, the HD gray tone makes detail highly visible