Description gray hd water-wash resin+ anycubic 1kg
Anycubic Water-Wash Resin+ Gray HD — High Detail Gray Resin for 3D Printing
Product Description
Anycubic Water-Wash Resin+ Gray HD is a water-washable photopolymer resin with a refined gray finish optimized for sharp contrast and visual accuracy. Its low viscosity enables fast curing and smooth surface quality. Ideal for miniature models, technical prototypes, and parts requiring precise detail visibility.
Key Advantages
- Water washable — no alcohol needed
- High-density gray color for enhanced detail contrast
- Fast curing with low shrinkage
- Low odor and easy post-processing
- Compatible with 365–405 nm LCD/DLP printers
Technical Specifications
| Parameter | Value |
|---|---|
| UV wavelength | 365–405 nm |
| Elongation at break | 8–15% |
| Density | 1.15–1.20 g/cm³ |
| Tensile modulus | 1600–1800 MPa |
| Viscosity | 150–250 mPa·s (25°C) |
| Flexural strength | 30–45 MPa |
| Flexural modulus | 1500–1600 MPa |
| Hardness | 80 Shore D |
| Heat deflection temp | 60–65°C |
| Tensile strength | 50–60 MPa |
| IZOD impact strength | 50–60 J/m |
| Shelf life | 1.5 years |
Instructions for Use
- Shake bottle 30 seconds before use
- Clean the resin vat and build platform
- Pour resin, configure print settings
- Rinse printed model in water for 30–60 sec
- UV cure for 5–15 minutes
Precautions
- Store in cool, dark place
- Use between 18–35°C
- Do not soak model in water too long
- Always post-cure after washing
FAQ
- Does this resin show fine details? — Yes, the high-density gray highlights surface contours perfectly.
- Can I clean it with water only? — Yes, no alcohol is needed.
- What printers are supported? — All LCD/DLP models using 365–405 nm UV light.