Description anycubic water-wash resin+ white 1kg — white resin for lcd/dlp
Anycubic Water-Wash Resin+ White — Water Washable White Resin for 3D Printing
Product Description
Anycubic Water-Wash Resin+ White is a white photopolymer resin for LCD and DLP 3D printers. It can be rinsed with water, eliminating the need for alcohol. It delivers smooth surfaces, sharp detail, and a clean white finish ideal for painting or display models.
Key Advantages
- Water-washable, no alcohol required
- Clean matte white surface for painting
- Low odor and low shrinkage
- Fast curing and smooth fluidity
- Compatible with 365–405 nm LCD/DLP printers
Technical Specifications
| Parameter | Value |
|---|---|
| UV wavelength | 365–405 nm |
| Elongation at break | 8–15% |
| Density | 1.15–1.20 g/cm³ |
| Tensile modulus | 1600–1800 MPa |
| Viscosity | 150–250 mPa·s (25°C) |
| Flexural strength | 30–45 MPa |
| Flexural modulus | 1500–1600 MPa |
| Hardness | 80 Shore D |
| Heat deflection temp | 60–65°C |
| Tensile strength | 50–60 MPa |
| IZOD impact strength | 50–60 J/m |
| Shelf life | 1.5 years |
Instructions for Use
- Shake the bottle for 30 seconds before use.
- Ensure the vat and platform are clean.
- Pour resin and set printer parameters.
- After printing, remove model and rinse in water.
- Dry the model and UV cure it for 5–15 minutes.
Precautions
- Store in a cool, dark place
- Use between 18–35°C
- Do not leave model soaking in water
- Wear gloves and avoid direct contact
Frequently Asked Questions
- Is this resin easy to clean? — Yes, it is washable with water only.
- Is the white color good for painting? — Yes, the matte finish is ideal for post-processing.
- Printer compatibility? — Compatible with 365–405 nm LCD/DLP printers.